Large scale, modern playland equipment manufacturer

news
How to maintain video arcade machines?
../upload/201805/1525938415.jpg
Guangzhou SQV Amusement Equipment Co.,LTD https://jjgamemachine.com/logo.jpg
2018-05-10 16:09:12
https://jjgamemachine.com/news/how_to_maintain_video_arcade_machines-en.html
shikewei    2018-05-10 16:13:38

How to maintain video arcade machine? Many manufacturers who purchase Guangzhou video arcade machine are a big problem. What should be done daily to maintain it? With the following Xiaobian together to learn how to simply maintain the amusement equipment.

Video game device maintenance methods mainly include the following points:

Strong Hammer Arcade game machine


A: The video arcade machine is made of plastic and glass fiber, and can be diluted and soaked with soapy water, disinfecting washing powder, bleaching powder, etc., and then wiped with a soft cloth or soft brush, then rinsed with water, or wiped with a clean cloth or dried . Finally disinfect with disinfectant.


Two: The soft sponge part of the video arcade machine can be scrubbed with a soft cloth and soapy water, or placed in the sunlight to sterilize it.


Three: video arcade machine, moisture, heat, do not fade the wooden part, can be washed with soap bubbles after drying, and then disinfectant spray disinfection.


Four: If the metal part is required to rust, use a brush to remove rust, and wipe it with a dry cloth; after sun exposure, you can buy a colorless Sanhe brand from the spray paint to a distance of about 20 cm, and spray it again. Spray it once again to protect it. After the paint is dry, it is cleaned, dried and disinfected.


Five: When the electrical parts of the circuit are cleaned, first of all, it is necessary to ensure that the power is turned off and watering is prohibited. Generally, wipe with a damp cloth, and then connect the power supply after it has dried.


6: All amusement equipment, video arcade machine, open air amusement equipment and drill pipe parts should not have accumulated water after rainy weather. If there is any, a hole with a diameter of 4 mm should be drilled at the lowest point.


Seven: If it is an indoor activity room, ground, walls, etc., daily ultraviolet radiation disinfection, indoor ventilation should be often. Disinfect once a week with hydrogen peroxide.


Eight: At the same time, we must professional staff to check the connection is not a solid part of the metal parts of the frequent activities of refueling, circuit electrical and ordinary parts of the parts are not damaged or off.


Contact Us